Install DappNode with Raid 0 SSD in Bios

Technical Support
1

Just sharing a small snag when setting up a DappNode with this configuration.
It is working fine for me and really made an older P55 chipset with i5 CPU pick up some disk speed.

So I setup the Raid 0 array in the bios and proceeded to run the install off the USB. All ran smooth until I hit the install grub bootloader step. In the menu it finds the actual drives but not the RAID partition.

So I noticed in the prior steps the RAID partition was /dev/mp126 remember that.

Then choose manual setup with will prompt you with /dev/mp add whatever your system call your raid partition and grub should install fine. If you get it wrong grub install will fail.

Hope this helps someone.

Thanks,
Roger

4 Likes
2

Hi rbrogan! And welcome to our community :wink:

Thanks a lot for trying this and sharing it to the community. It’s nice to know it will help someone to have better fun with the DAppNode, yeah! :partying_face:

3

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.